{"title":"Transmission Cooler Lines","description":null,"products":[{"product_id":"the-right-stuff-1981-87-buick-grand-national-pre-bent-oe-steel-oil-cooler-line-aol8601","title":"The Right Stuff 1981-87 Buick Grand National, Pre-Bent OE Steel Oil Cooler Line - (AOL8601)","description":"\u003cp\u003eTrans cooler lines on a 1981-1987 Buick Grand National sit low and take every bit of road spray, so the originals are often rusted or weeping. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, bent to the original factory pattern so it goes in without a tubing bender.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eSteel matches the factory appearance and is easy to fine-tune by hand\u003c\/li\u003e\n\u003cli\u003eMade for the 1981-1987 Buick Grand National, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669249503444,"sku":"AOL8601","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/AOL8601-0__66188.1652736641.386.513.jpg?v=1789452680"},{"product_id":"the-right-stuff-1981-87-buick-grand-national-pre-bent-stainless-steel-oil-cooler-line-aol8601s","title":"The Right Stuff 1981-87 Buick Grand National, Pre-Bent Stainless Steel Oil Cooler Line - (AOL8601S)","description":"\u003cp\u003eFactory transmission cooler lines on a 1981-1987 Buick Grand National are easy to kink and hard to bend neatly by hand. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, shaped to follow the factory routing instead of being bent by hand in the garage.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel resists corrosion and keeps a clean natural finish\u003c\/li\u003e\n\u003cli\u003eMade for the 1981-1987 Buick Grand National, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669250683092,"sku":"AOL8601S","price":65.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/AOL8601S-0__22550.1652736646.386.513.jpg?v=1789452683"},{"product_id":"the-right-stuff-1957-oldsmobile-super-88-pre-bent-oe-steel-transmission-cooler-line-atc5701","title":"The Right Stuff 1957 Oldsmobile Super 88, Pre-Bent OE Steel Transmission Cooler Line - (ATC5701)","description":"\u003cp\u003eTrans cooler lines on a 1957 Oldsmobile Super 88 sit low and take every bit of road spray, so the originals are often rusted or weeping. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, bent to the original factory pattern so it goes in without a tubing bender.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eSteel matches the factory appearance and is easy to fine-tune by hand\u003c\/li\u003e\n\u003cli\u003eMade for the 1957 Oldsmobile Super 88, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669460758740,"sku":"ATC5701","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC5701-0__92962.1652736710.386.513.jpg?v=1789453190"},{"product_id":"the-right-stuff-1957-oldsmobile-super-88-pre-bent-stainless-steel-transmission-cooler-line-atc5701s","title":"The Right Stuff 1957 Oldsmobile Super 88, Pre-Bent Stainless Steel Transmission Cooler Line - (ATC5701S)","description":"\u003cp\u003eFactory transmission cooler lines on a 1957 Oldsmobile Super 88 are easy to kink and hard to bend neatly by hand. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, shaped to follow the factory routing instead of being bent by hand in the garage.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel holds up to moisture and road salt far longer than plain steel\u003c\/li\u003e\n\u003cli\u003eMade for the 1957 Oldsmobile Super 88, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669462364372,"sku":"ATC5701S","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC5701S-0__08194.1652736715.386.513.jpg?v=1789453192"},{"product_id":"the-right-stuff-1959-oldsmobile-super-88-pre-bent-oe-steel-transmission-cooler-line-atc5901","title":"The Right Stuff 1959 Oldsmobile Super 88, Pre-Bent OE Steel Transmission Cooler Line - (ATC5901)","description":"\u003cp\u003eFactory transmission cooler lines on a 1959 Oldsmobile Super 88 are easy to kink and hard to bend neatly by hand. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, shaped to follow the factory routing instead of being bent by hand in the garage.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing.\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home.\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings.\u003c\/li\u003e\n\u003cli\u003eSteel matches the factory appearance and is easy to fine-tune by hand.\u003c\/li\u003e\n\u003cli\u003eMade for the 1959 Oldsmobile Super 88, not cut from a universal coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation.\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669463249108,"sku":"ATC5901","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC5901-0__67486.1652736715.386.513.jpg?v=1789453195"},{"product_id":"the-right-stuff-1959-oldsmobile-super-88-pre-bent-stainless-steel-transmission-cooler-line-atc5901s","title":"The Right Stuff 1959 Oldsmobile Super 88, Pre-Bent Stainless Steel Transmission Cooler Line - (ATC5901S)","description":"\u003cp\u003eFactory transmission cooler lines on a 1959 Oldsmobile Super 88 are easy to kink and hard to bend neatly by hand. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, shaped to follow the factory routing instead of being bent by hand in the garage.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing.\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home.\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings.\u003c\/li\u003e\n\u003cli\u003eStainless steel holds up to moisture and road salt far longer than plain steel.\u003c\/li\u003e\n\u003cli\u003eMade for the 1959 Oldsmobile Super 88, not cut from a universal coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation.\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares.\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669463281876,"sku":"ATC5901S","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC5901S-0__72472.1652736711.386.513.jpg?v=1789453197"},{"product_id":"the-right-stuff-1962-pontiac-pre-bent-oe-steel-hydromatic-transmission-cooler-line-atc6201","title":"The Right Stuff 1962 Pontiac, Pre-Bent OE Steel Hydromatic Transmission Cooler Line - (ATC6201)","description":"\u003cp\u003eA leaking cooler line can drain an automatic quickly, and the originals on a 1962 Pontiac are usually past due. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eSteel matches the factory appearance and is easy to fine-tune by hand\u003c\/li\u003e\n\u003cli\u003eMade for the 1962 Pontiac, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669464330452,"sku":"ATC6201","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC6201-0__83121.1652736716.386.513.jpg?v=1789453199"},{"product_id":"the-right-stuff-1962-pontiac-pre-bent-stainless-steel-hydromatic-transmission-cooler-line-atc6201s","title":"The Right Stuff 1962 Pontiac, Pre-Bent Stainless Steel Hydromatic Transmission Cooler Line - (ATC6201S)","description":"\u003cp\u003eA leaking cooler line can drain an automatic quickly, and the originals on a 1962 Pontiac are usually past due. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel resists corrosion and keeps a clean natural finish\u003c\/li\u003e\n\u003cli\u003eMade for the 1962 Pontiac, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669464363220,"sku":"ATC6201S","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC6201S-0__91745.1652736715.386.513.jpg?v=1789453201"},{"product_id":"the-right-stuff-1963-oldsmobile-starfire-pre-bent-oe-steel-transmission-cooler-line-atc6301","title":"The Right Stuff 1963 Oldsmobile Starfire, Pre-Bent OE Steel Transmission Cooler Line - (ATC6301)","description":"\u003cp\u003eTrans cooler lines on a 1963 Oldsmobile Starfire sit low and take every bit of road spray, so the originals are often rusted or weeping. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, bent to the original factory pattern so it goes in without a tubing bender.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eSteel matches the factory appearance and is easy to fine-tune by hand\u003c\/li\u003e\n\u003cli\u003eMade for the 1963 Oldsmobile Starfire, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669464428756,"sku":"ATC6301","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC6301-0__49021.1652736711.386.513.jpg?v=1789453204"},{"product_id":"the-right-stuff-63-oldsmobile-starfire-pre-bent-stainless-steel-transmission-cooler-line-atc6301s","title":"The Right Stuff 63 Oldsmobile Starfire, Pre-Bent Stainless Steel Transmission Cooler Line - (ATC6301S)","description":"\u003cp\u003eTrans cooler lines on a 1963 Oldsmobile Starfire sit low and take every bit of road spray, so the originals are often rusted or weeping. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, bent to the original factory pattern so it goes in without a tubing bender.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel resists corrosion and keeps a clean natural finish\u003c\/li\u003e\n\u003cli\u003eMade for the 1963 Oldsmobile Starfire, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669465247956,"sku":"ATC6301S","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC6301S-0__01417.1652736716.386.513.jpg?v=1789453206"},{"product_id":"the-right-stuff-1964-buick-skylark-pre-bent-oe-steel-transmission-cooler-line-atc6401","title":"The Right Stuff 1964 Buick Skylark, Pre-Bent OE Steel Transmission Cooler Line - (ATC6401)","description":"\u003cp\u003eA leaking cooler line can drain an automatic quickly, and the originals on a 1964 Buick Skylark are usually past due. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eSteel matches the factory appearance and is easy to fine-tune by hand\u003c\/li\u003e\n\u003cli\u003eMade for the 1964 Buick Skylark, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669466099924,"sku":"ATC6401","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC6401-0__21629.1652736715.386.513.jpg?v=1789453209"},{"product_id":"the-right-stuff-64-buick-skylark-pre-bent-stainless-steel-transmission-cooler-line-atc6401s","title":"The Right Stuff 64 Buick Skylark, Pre-Bent Stainless Steel Transmission Cooler Line - (ATC6401S)","description":"\u003cp\u003eTrans cooler lines on a 1964 Buick Skylark sit low and take every bit of road spray, so the originals are often rusted or weeping. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, bent to the original factory pattern so it goes in without a tubing bender.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel resists corrosion and keeps a clean natural finish\u003c\/li\u003e\n\u003cli\u003eMade for the 1964 Buick Skylark, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669466951892,"sku":"ATC6401S","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC6401S-0__06288.1652736712.386.513.jpg?v=1789453210"},{"product_id":"the-right-stuff-1966-67-oldsmobile-cutlass-442-pre-bent-oe-steel-transmission-cooler-line-atc6602","title":"The Right Stuff 1966-67 Oldsmobile Cutlass\/442, Pre-Bent OE Steel Transmission Cooler Line - (ATC6602)","description":"\u003cp\u003eFactory transmission cooler lines on a 1966-1967 Oldsmobile Cutlass\/442 are easy to kink and hard to bend neatly by hand. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, shaped to follow the factory routing instead of being bent by hand in the garage.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eSteel matches the factory appearance and is easy to fine-tune by hand\u003c\/li\u003e\n\u003cli\u003eMade for the 1966-1967 Oldsmobile Cutlass\/442, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669467869396,"sku":"ATC6602","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC6602-0__56777.1652736717.386.513.jpg?v=1789453213"},{"product_id":"the-right-stuff-1966-67-cutlass-442-pre-bent-stainless-steel-transmission-cooler-line-atc6602s","title":"The Right Stuff 1966-67 Cutlass\/442, Pre-Bent Stainless Steel Transmission Cooler Line - (ATC6602S)","description":"\u003cp\u003eA leaking cooler line can drain an automatic quickly, and the originals on a 1966-1967 Cutlass\/442 are usually past due. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel holds up to moisture and road salt far longer than plain steel\u003c\/li\u003e\n\u003cli\u003eMade for the 1966-1967 Cutlass\/442, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669468754132,"sku":"ATC6602S","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC6602S-0__42980.1652736716.386.513.jpg?v=1789453215"},{"product_id":"the-right-stuff-1967-buick-skylark-pre-bent-oe-steel-transmission-cooler-line-atc6705","title":"The Right Stuff 1967 Buick Skylark, Pre-Bent OE Steel Transmission Cooler Line - (ATC6705)","description":"\u003cp\u003eTrans cooler lines on a 1967 Buick Skylark sit low and take every bit of road spray, so the originals are often rusted or weeping. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, bent to the original factory pattern so it goes in without a tubing bender.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern.\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home.\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings.\u003c\/li\u003e\n\u003cli\u003eSteel matches the factory appearance and is easy to fine-tune by hand.\u003c\/li\u003e\n\u003cli\u003eMade for the 1967 Buick Skylark, not cut from a universal coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation.\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669470359764,"sku":"ATC6705","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC6705-0__11003.1652736712.386.513.jpg?v=1789453217"},{"product_id":"the-right-stuff-1967-buick-skylark-pre-bent-stainless-steel-transmission-cooler-line-atc6705s","title":"The Right Stuff 1967 Buick Skylark, Pre-Bent Stainless Steel Transmission Cooler Line - (ATC6705S)","description":"\u003cp\u003eA leaking cooler line can drain an automatic quickly, and the originals on a 1967 Buick Skylark are usually past due. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel holds up to moisture and road salt far longer than plain steel\u003c\/li\u003e\n\u003cli\u003eMade for the 1967 Buick Skylark, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669471572180,"sku":"ATC6705S","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC6705S-0__35881.1652736717.386.513.jpg?v=1789453220"},{"product_id":"the-right-stuff-1967-pontiac-a-body-pre-bent-oe-steel-transmission-cooler-line-atc6715","title":"The Right Stuff 1967 Pontiac A-Body, Pre-Bent OE Steel Transmission Cooler Line - (ATC6715)","description":"\u003cp\u003eTrans cooler lines on a 1967 Pontiac A-Body sit low and take every bit of road spray, so the originals are often rusted or weeping. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, bent to the original factory pattern so it goes in without a tubing bender.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eSteel matches the factory appearance and is easy to fine-tune by hand\u003c\/li\u003e\n\u003cli\u003eMade for the 1967 Pontiac A-Body, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669472424148,"sku":"ATC6715","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC6715-0__32050.1652736716.386.513.jpg?v=1789453222"},{"product_id":"the-right-stuff-67-pontiac-a-body-pre-bent-stainless-steel-transmission-cooler-line-atc6715s","title":"The Right Stuff 67 Pontiac A-Body, Pre-Bent Stainless Steel Transmission Cooler Line - (ATC6715S)","description":"\u003cp\u003eA leaking cooler line can drain an automatic quickly, and the originals on a 1967 Pontiac A-Body are usually past due. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel holds up to moisture and road salt far longer than plain steel\u003c\/li\u003e\n\u003cli\u003eMade for the 1967 Pontiac A-Body, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669473439956,"sku":"ATC6715S","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC6715S-0__43817.1652736713.386.513.jpg?v=1789453224"},{"product_id":"the-right-stuff-67-pontiac-gto-a-body-ho-pre-bent-oe-steel-transmission-cooler-line-atc6716","title":"The Right Stuff 67 Pontiac GTO\/A-Body-HO, Pre-Bent OE Steel Transmission Cooler Line - (ATC6716)","description":"\u003cp\u003eFactory transmission cooler lines on a 1967 Pontiac GTO\/A-Body-HO are easy to kink and hard to bend neatly by hand. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, shaped to follow the factory routing instead of being bent by hand in the garage.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eOE-style steel keeps the original look for a correct restoration\u003c\/li\u003e\n\u003cli\u003eMade for the 1967 Pontiac GTO\/A-Body-HO, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669474062548,"sku":"ATC6716","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC6716-0__28957.1652736718.386.513.jpg?v=1789453227"},{"product_id":"the-right-stuff-67-pontiac-a-body-ho-pre-bent-stainless-steel-transmission-cooler-line-atc6716s","title":"The Right Stuff 67 Pontiac A-Body-HO, Pre-Bent Stainless Steel Transmission Cooler Line - (ATC6716S)","description":"\u003cp\u003eTrans cooler lines on a 1967 Pontiac A-Body-HO sit low and take every bit of road spray, so the originals are often rusted or weeping. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, bent to the original factory pattern so it goes in without a tubing bender.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel holds up to moisture and road salt far longer than plain steel\u003c\/li\u003e\n\u003cli\u003eMade for the 1967 Pontiac A-Body-HO, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669475012820,"sku":"ATC6716S","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC6716S-0__88239.1652736717.386.513.jpg?v=1789453229"},{"product_id":"the-right-stuff-1968-buick-pre-bent-oe-steel-transmission-cooler-line-atc6801","title":"The Right Stuff 1968 Buick  Pre-Bent OE Steel Transmission Cooler Line - (ATC6801)","description":"\u003cp\u003eFactory transmission cooler lines on a 1968 Buick are easy to kink and hard to bend neatly by hand. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, shaped to follow the factory routing instead of being bent by hand in the garage.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eSteel matches the factory appearance and is easy to fine-tune by hand\u003c\/li\u003e\n\u003cli\u003eMade for the 1968 Buick, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669476651220,"sku":"ATC6801","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC6801-0__19606.1652736713.386.513.jpg?v=1789453231"},{"product_id":"the-right-stuff-1968-buick-pre-bent-stainless-steel-transmission-cooler-line-atc6801s","title":"The Right Stuff 1968 Buick, Pre-Bent Stainless Steel Transmission Cooler Line - (ATC6801S)","description":"\u003cp\u003eFactory transmission cooler lines on a 1968 Buick are easy to kink and hard to bend neatly by hand. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, shaped to follow the factory routing instead of being bent by hand in the garage.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing.\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home.\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings.\u003c\/li\u003e\n\u003cli\u003eStainless steel resists corrosion and keeps a clean natural finish.\u003c\/li\u003e\n\u003cli\u003eMade for the 1968 Buick, not cut from a universal coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation.\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares.\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669477568724,"sku":"ATC6801S","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC6801S-0__86963.1652736718.386.513.jpg?v=1789453234"},{"product_id":"the-right-stuff-68-72-oldsmobile-cutlass-442-pre-bent-oe-steel-transmission-cooler-line-atc6803","title":"The Right Stuff 68-72 Oldsmobile Cutlass\/442, Pre-Bent OE Steel Transmission Cooler Line - (ATC6803)","description":"\u003cp\u003eA leaking cooler line can drain an automatic quickly, and the originals on a 1968-1972 Oldsmobile Cutlass\/442 are usually past due. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eOE-style steel keeps the original look for a correct restoration\u003c\/li\u003e\n\u003cli\u003eMade for the 1968-1972 Oldsmobile Cutlass\/442, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669478125780,"sku":"ATC6803","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC6803-0__62018.1652736717.386.513.jpg?v=1789453236"},{"product_id":"the-right-stuff-1968-72-cutlass-442-pre-bent-stainless-steel-transmission-cooler-line-atc6803s","title":"The Right Stuff 1968-72 Cutlass\/442, Pre-Bent Stainless Steel Transmission Cooler Line - (ATC6803S)","description":"\u003cp\u003eFactory transmission cooler lines on a 1968-1972 Cutlass\/442 are easy to kink and hard to bend neatly by hand. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, shaped to follow the factory routing instead of being bent by hand in the garage.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing.\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home.\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings.\u003c\/li\u003e\n\u003cli\u003eStainless steel resists corrosion and keeps a clean natural finish.\u003c\/li\u003e\n\u003cli\u003eMade for the 1968-1972 Cutlass\/442, not cut from a universal coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation.\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares.\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669478158548,"sku":"ATC6803S","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC6803S-0__02115.1652736714.386.513.jpg?v=1789453238"},{"product_id":"the-right-stuff-1968-72-buick-skylark-pre-bent-oe-steel-transmission-cooler-line-atc6805","title":"The Right Stuff 1968-72 Buick Skylark, Pre-Bent OE Steel Transmission Cooler Line - (ATC6805)","description":"\u003cp\u003eA leaking cooler line can drain an automatic quickly, and the originals on a 1968-1972 Buick Skylark are usually past due. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eSteel matches the factory appearance and is easy to fine-tune by hand\u003c\/li\u003e\n\u003cli\u003eMade for the 1968-1972 Buick Skylark, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669479010516,"sku":"ATC6805","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC6805-0__19113.1652736719.386.513.jpg?v=1789453240"},{"product_id":"the-right-stuff-1968-72-buick-skylark-pre-bent-stainless-steel-transmission-cooler-line-atc6805s","title":"The Right Stuff 1968-72 Buick Skylark, Pre-Bent Stainless Steel Transmission Cooler Line - (ATC6805S)","description":"\u003cp\u003eA leaking cooler line can drain an automatic quickly, and the originals on a 1968-1972 Buick Skylark are usually past due. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel holds up to moisture and road salt far longer than plain steel\u003c\/li\u003e\n\u003cli\u003eMade for the 1968-1972 Buick Skylark, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669479239892,"sku":"ATC6805S","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC6805S-0__86526.1652736718.386.513.jpg?v=1789453242"},{"product_id":"the-right-stuff-1967-pontiac-lemans-tempest-pre-bent-oe-steel-transmission-cooler-line-atc7003","title":"The Right Stuff 1967 Pontiac LeMans\/Tempest, Pre-Bent OE Steel Transmission Cooler Line - (ATC7003)","description":"\u003cp\u003eFactory transmission cooler lines on a 1967 Pontiac LeMans\/Tempest are easy to kink and hard to bend neatly by hand. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, shaped to follow the factory routing instead of being bent by hand in the garage.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eSteel matches the factory appearance and is easy to fine-tune by hand\u003c\/li\u003e\n\u003cli\u003eMade for the 1967 Pontiac LeMans\/Tempest, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669480190164,"sku":"ATC7003","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC7003-0__73233.1652736714.386.513.jpg?v=1789453245"},{"product_id":"the-right-stuff-1967-lemans-tempest-w-thm350-pre-bent-stainless-steel-transmission-cooler-line-atc7003s","title":"The Right Stuff 1967 LeMans\/Tempest W\/THM350 Pre-Bent Stainless Steel Transmission Cooler Line - (ATC7003S)","description":"\u003cp\u003eFactory transmission cooler lines on a 1967 LeMans\/Tempest w\/THM350 are easy to kink and hard to bend neatly by hand. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, shaped to follow the factory routing instead of being bent by hand in the garage.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel holds up to moisture and road salt far longer than plain steel\u003c\/li\u003e\n\u003cli\u003eMade for the 1967 LeMans\/Tempest w\/THM350, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eListed for \u003cstrong\u003ew\/THM350\u003c\/strong\u003e; confirm your vehicle matches before ordering\u003c\/li\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669481107668,"sku":"ATC7003S","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC7003S-0__09762.1652736719.386.513.jpg?v=1789453247"},{"product_id":"the-right-stuff-1968-72-pontiac-a-body-pre-bent-oe-steel-transmission-cooler-line-atc7015","title":"The Right Stuff 1968-72 Pontiac A-Body, Pre-Bent OE Steel Transmission Cooler Line - (ATC7015)","description":"\u003cp\u003eFactory transmission cooler lines on a 1968-1972 Pontiac A-Body are easy to kink and hard to bend neatly by hand. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, shaped to follow the factory routing instead of being bent by hand in the garage.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern.\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home.\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings.\u003c\/li\u003e\n\u003cli\u003eOE-style steel keeps the original look for a correct restoration.\u003c\/li\u003e\n\u003cli\u003eMade for the 1968-1972 Pontiac A-Body, not cut from a universal coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation.\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669481992404,"sku":"ATC7015","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC7015-0__88235.1652736718.386.513.jpg?v=1789453249"},{"product_id":"the-right-stuff-68-72-pontiac-a-body-pre-bent-stainless-steel-transmission-cooler-line-atc7015s","title":"The Right Stuff 68-72 Pontiac A-Body, Pre-Bent Stainless Steel Transmission Cooler Line - (ATC7015S)","description":"\u003cp\u003eTrans cooler lines on a 1968-1972 Pontiac A-Body sit low and take every bit of road spray, so the originals are often rusted or weeping. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, bent to the original factory pattern so it goes in without a tubing bender.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel resists corrosion and keeps a clean natural finish\u003c\/li\u003e\n\u003cli\u003eMade for the 1968-1972 Pontiac A-Body, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669483040980,"sku":"ATC7015S","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC7015S-0__41172.1652736715.386.513.jpg?v=1789453251"},{"product_id":"the-right-stuff-1970-oldsmobile-442-pre-bent-oe-steel-auxilary-transmission-cooler-line-atc70ax","title":"The Right Stuff 1970 Oldsmobile 442, Pre-Bent OE Steel Auxilary Transmission Cooler Line - (ATC70AX)","description":"\u003cp\u003eTrans cooler lines on a 1970 Oldsmobile 442 sit low and take every bit of road spray, so the originals are often rusted or weeping. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, bent to the original factory pattern so it goes in without a tubing bender.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eSteel matches the factory appearance and is easy to fine-tune by hand\u003c\/li\u003e\n\u003cli\u003eMade for the 1970 Oldsmobile 442, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669483991252,"sku":"ATC70AX","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC70AX-0__88763.1652736720.386.513.jpg?v=1789453253"},{"product_id":"the-right-stuff-1970-oldsmobile-442-pre-bent-stainless-steel-auxilary-transmission-cooler-line-atc70axs","title":"The Right Stuff 1970 Oldsmobile 442, Pre-Bent Stainless Steel Auxilary Transmission Cooler Line - (ATC70AXS)","description":"\u003cp\u003eA leaking cooler line can drain an automatic quickly, and the originals on a 1970 Oldsmobile 442 are usually past due. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing.\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home.\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings.\u003c\/li\u003e\n\u003cli\u003eStainless steel resists corrosion and keeps a clean natural finish.\u003c\/li\u003e\n\u003cli\u003eMade for the 1970 Oldsmobile 442, not cut from a universal coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation.\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares.\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669484908756,"sku":"ATC70AXS","price":78.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC70AXS-0__61615.1652736718.386.513.jpg?v=1789453255"},{"product_id":"the-right-stuff-1973-75-pontiac-a-body-pre-bent-oe-steel-transmission-cooler-line-atc7305","title":"The Right Stuff 1973-75 Pontiac A-Body, Pre-Bent OE Steel Transmission Cooler Line - (ATC7305)","description":"\u003cp\u003eA leaking cooler line can drain an automatic quickly, and the originals on a 1973-1975 Pontiac A-Body are usually past due. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eSteel matches the factory appearance and is easy to fine-tune by hand\u003c\/li\u003e\n\u003cli\u003eMade for the 1973-1975 Pontiac A-Body, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669486252244,"sku":"ATC7305","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC7305-0__30690.1652736715.386.513.jpg?v=1789453258"},{"product_id":"the-right-stuff-1973-75-pontiac-a-body-pre-bent-stainless-steel-transmission-cooler-line-atc7305s","title":"The Right Stuff 1973-75 Pontiac A-Body, Pre-Bent Stainless Steel Transmission Cooler Line - (ATC7305S)","description":"\u003cp\u003eTrans cooler lines on a 1973-1975 Pontiac A-Body sit low and take every bit of road spray, so the originals are often rusted or weeping. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, bent to the original factory pattern so it goes in without a tubing bender.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel resists corrosion and keeps a clean natural finish\u003c\/li\u003e\n\u003cli\u003eMade for the 1973-1975 Pontiac A-Body, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669487104212,"sku":"ATC7305S","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC7305S-0__69585.1652736720.386.513.jpg?v=1789453260"},{"product_id":"the-right-stuff-1973-77-oldsmobile-a-body-pre-bent-oe-steel-transmission-cooler-line-atc7503","title":"The Right Stuff 1973-77 Oldsmobile A-Body, Pre-Bent OE Steel Transmission Cooler Line - (ATC7503)","description":"\u003cp\u003eFactory transmission cooler lines on a 1973-1977 Oldsmobile A-Body are easy to kink and hard to bend neatly by hand. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, shaped to follow the factory routing instead of being bent by hand in the garage.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eSteel matches the factory appearance and is easy to fine-tune by hand\u003c\/li\u003e\n\u003cli\u003eMade for the 1973-1977 Oldsmobile A-Body, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669487988948,"sku":"ATC7503","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC7503-0__90941.1652736719.386.513.jpg?v=1789453262"},{"product_id":"the-right-stuff-1973-77-olds-a-body-pre-bent-stainless-steel-transmission-cooler-line-atc7503s","title":"The Right Stuff 1973-77 Olds A-Body, Pre-Bent Stainless Steel Transmission Cooler Line - (ATC7503S)","description":"\u003cp\u003eA leaking cooler line can drain an automatic quickly, and the originals on a 1973-1977 Olds A-Body are usually past due. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel holds up to moisture and road salt far longer than plain steel\u003c\/li\u003e\n\u003cli\u003eMade for the 1973-1977 Olds A-Body, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669488840916,"sku":"ATC7503S","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC7503S-0__87604.1652736716.386.513.jpg?v=1789453264"},{"product_id":"the-right-stuff-1978-79-oldsmobile-g-body-pre-bent-oe-steel-transmission-cooler-line-atc7901","title":"The Right Stuff 1978-79 Oldsmobile G-Body, Pre-Bent OE Steel Transmission Cooler Line - (ATC7901)","description":"\u003cp\u003eTrans cooler lines on a 1978-1979 Oldsmobile G-Body sit low and take every bit of road spray, so the originals are often rusted or weeping. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, bent to the original factory pattern so it goes in without a tubing bender.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eOE-style steel keeps the original look for a correct restoration\u003c\/li\u003e\n\u003cli\u003eMade for the 1978-1979 Oldsmobile G-Body, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669489496276,"sku":"ATC7901","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC7901-0__58699.1652736720.386.513.jpg?v=1789453266"},{"product_id":"the-right-stuff-1978-79-olds-g-body-pre-bent-stainless-steel-transmission-cooler-line-atc7901s","title":"The Right Stuff 1978-79 Olds G-Body, Pre-Bent Stainless Steel Transmission Cooler Line - (ATC7901S)","description":"\u003cp\u003eA leaking cooler line can drain an automatic quickly, and the originals on a 1978-1979 Olds G-Body are usually past due. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel holds up to moisture and road salt far longer than plain steel\u003c\/li\u003e\n\u003cli\u003eMade for the 1978-1979 Olds G-Body, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669490413780,"sku":"ATC7901S","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC7901S-0__94857.1652736719.386.513.jpg?v=1789453268"},{"product_id":"the-right-stuff-1982-buick-grand-national-pre-bent-oe-steel-transmission-cooler-line-atc8201","title":"The Right Stuff 1982 Buick Grand National, Pre-Bent OE Steel Transmission Cooler Line - (ATC8201)","description":"\u003cp\u003eA leaking cooler line can drain an automatic quickly, and the originals on a 1982 Buick Grand National are usually past due. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern.\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home.\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings.\u003c\/li\u003e\n\u003cli\u003eSteel matches the factory appearance and is easy to fine-tune by hand.\u003c\/li\u003e\n\u003cli\u003eMade for the 1982 Buick Grand National, not cut from a universal coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation.\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669491265748,"sku":"ATC8201","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC8201-0__91201.1652736716.386.513.jpg?v=1789453270"},{"product_id":"the-right-stuff-1982-buick-grand-national-pre-bent-stainless-steel-transmission-cooler-line-atc8201s","title":"The Right Stuff 1982 Buick Grand National, Pre-Bent Stainless Steel Transmission Cooler Line - (ATC8201S)","description":"\u003cp\u003eA leaking cooler line can drain an automatic quickly, and the originals on a 1982 Buick Grand National are usually past due. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel resists corrosion and keeps a clean natural finish\u003c\/li\u003e\n\u003cli\u003eMade for the 1982 Buick Grand National, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669492183252,"sku":"ATC8201S","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC8201S-0__81256.1652736721.386.513.jpg?v=1789453272"},{"product_id":"the-right-stuff-1985-oldsmobile-cutlass-pre-bent-oe-steel-transmission-cooler-line-atc8501","title":"The Right Stuff 1985 Oldsmobile Cutlass, Pre-Bent OE Steel Transmission Cooler Line - (ATC8501)","description":"\u003cp\u003eA leaking cooler line can drain an automatic quickly, and the originals on a 1985 Oldsmobile Cutlass are usually past due. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eSteel matches the factory appearance and is easy to fine-tune by hand\u003c\/li\u003e\n\u003cli\u003eMade for the 1985 Oldsmobile Cutlass, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669493330132,"sku":"ATC8501","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC8501-0__63746.1652736720.386.513.jpg?v=1789453274"},{"product_id":"the-right-stuff-85-oldsmobile-cutlass-pre-bent-stainless-steel-transmission-cooler-line-atc8501s","title":"The Right Stuff 85 Oldsmobile Cutlass, Pre-Bent Stainless Steel Transmission Cooler Line - (ATC8501S)","description":"\u003cp\u003eA leaking cooler line can drain an automatic quickly, and the originals on a 1985 Oldsmobile Cutlass are usually past due. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel holds up to moisture and road salt far longer than plain steel\u003c\/li\u003e\n\u003cli\u003eMade for the 1985 Oldsmobile Cutlass, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669494378708,"sku":"ATC8501S","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC8501S-0__87768.1652736717.386.513.jpg?v=1789453276"},{"product_id":"the-right-stuff-86-87-oldsmobile-cutlass-automatic-transmission-oil-cooler-tube-oe-steel-atc8601","title":"The Right Stuff 86-87 Oldsmobile Cutlass Automatic Transmission Oil Cooler Tube, OE Steel - (ATC8601)","description":"\u003cp\u003eA leaking cooler line can drain an automatic quickly, and the originals on a 1986-1987 Oldsmobile Cutlass Automatic Transmission Oil Cooler Tube are usually past due. This Right Stuff pre-bent OE-style steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eOE-style steel keeps the original look for a correct restoration\u003c\/li\u003e\n\u003cli\u003eMade for the 1986-1987 Oldsmobile Cutlass Automatic Transmission Oil Cooler Tube, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669495230676,"sku":"ATC8601","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC8601-0__56919.1657139274.386.513.jpg?v=1789453279"},{"product_id":"the-right-stuff-86-87-oldsmobile-cutlass-automatic-transmission-oil-cooler-tube-stainless-steel-atc8601s","title":"The Right Stuff 86-87 Oldsmobile Cutlass Automatic Transmission Oil Cooler Tube, Stainless Steel - (ATC8601S)","description":"\u003cp\u003eTrans cooler lines on a 1986-1987 Oldsmobile Cutlass Automatic Transmission Oil Cooler Tube sit low and take every bit of road spray, so the originals are often rusted or weeping. This Right Stuff pre-bent stainless steel transmission cooler line is the line that carries automatic transmission fluid between the transmission and the cooler in the radiator, bent to the original factory pattern so it goes in without a tubing bender.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds finished with OE-type fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel holds up to moisture and road salt far longer than plain steel\u003c\/li\u003e\n\u003cli\u003eMade for the 1986-1987 Oldsmobile Cutlass Automatic Transmission Oil Cooler Tube, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCheck the fluid level and inspect the cooler fittings at the radiator after installation\u003c\/li\u003e\n\u003cli\u003eStainless is harder than mild steel, so tighten fittings carefully to seat the flares\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669496148180,"sku":"ATC8601S","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATC8601-0__56919.1656717720.220.290__75120.1657139276.386.513.jpg?v=1789453281"},{"product_id":"the-right-stuff-64-67-pontiac-gto-a-body-pre-bent-oe-steel-transmission-vacuum-line-atv6401","title":"The Right Stuff 64-67 Pontiac GTO\/A-Body, Pre-Bent OE Steel Transmission Vacuum Line - (ATV6401)","description":"\u003cp\u003eA leaky or mismatched vacuum line on a 1964-1967 Pontiac GTO\/A-Body costs you drivability and looks out of place under the hood. This Right Stuff pre-bent OE-style steel transmission vacuum line is the line that supplies engine vacuum to the automatic transmission modulator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds formed to match the original part\u003c\/li\u003e\n\u003cli\u003eOE-style steel keeps the original look for a correct restoration\u003c\/li\u003e\n\u003cli\u003eMade for the 1964-1967 Pontiac GTO\/A-Body, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSmall rubber connector hoses are not part of this listing\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669498867924,"sku":"ATV6401","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATV6401-0__23393.1652736720.386.513.jpg?v=1789453289"},{"product_id":"the-right-stuff-1964-67-pontiac-a-body-pre-bent-stainless-steel-transmission-vacuum-line-atv6401s","title":"The Right Stuff 1964-67 Pontiac A-Body, Pre-Bent Stainless Steel Transmission Vacuum Line - (ATV6401S)","description":"\u003cp\u003eSmall vacuum lines on a 1964-1967 Pontiac A-Body crack, corrode and get replaced with rubber hose over the years. This Right Stuff pre-bent stainless steel transmission vacuum line is the line that supplies engine vacuum to the automatic transmission modulator, bent to the original factory pattern so it goes in without a tubing bender.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds formed to match the original part\u003c\/li\u003e\n\u003cli\u003eStainless steel holds up to moisture and road salt far longer than plain steel\u003c\/li\u003e\n\u003cli\u003eMade for the 1964-1967 Pontiac A-Body, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSmall rubber connector hoses are not part of this listing\u003c\/li\u003e\n\u003cli\u003eStainless is stiffer than mild steel, so make any fine adjustments by hand slowly\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669498900692,"sku":"ATV6401S","price":78.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATV6401S-0__82134.1652736717.386.513.jpg?v=1789453287"},{"product_id":"the-right-stuff-64-66-pontiac-gto-a-body-pre-bent-oe-steel-transmission-vacuum-line-atv6403","title":"The Right Stuff 64-66 Pontiac GTO\/A-Body, Pre-Bent OE Steel Transmission Vacuum Line - (ATV6403)","description":"\u003cp\u003eA leaky or mismatched vacuum line on a 1964-1966 Pontiac GTO\/A-Body costs you drivability and looks out of place under the hood. This Right Stuff pre-bent OE-style steel transmission vacuum line is the line that supplies engine vacuum to the automatic transmission modulator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC bent to follow the factory routing\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds formed to match the original part\u003c\/li\u003e\n\u003cli\u003eOE-style steel keeps the original look for a correct restoration\u003c\/li\u003e\n\u003cli\u003eMade for the 1964-1966 Pontiac GTO\/A-Body, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSmall rubber connector hoses are not part of this listing\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669498933460,"sku":"ATV6403","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATV6403-0__25247.1652736722.386.513.jpg?v=1789453290"},{"product_id":"the-right-stuff-64-66-pontiac-a-body-prebent-stainless-steel-transmission-vacuum-line-atv6403s","title":"The Right Stuff 64-66 Pontiac A-Body, PreBent Stainless Steel Transmission Vacuum Line - (ATV6403S)","description":"\u003cp\u003eA leaky or mismatched vacuum line on a 1964-1966 Pontiac A-Body costs you drivability and looks out of place under the hood. This Right Stuff pre-bent stainless steel transmission vacuum line is the line that supplies engine vacuum to the automatic transmission modulator, CNC bent to match the original routing and ready to install.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds formed to match the original part\u003c\/li\u003e\n\u003cli\u003eStainless steel resists corrosion and keeps a clean natural finish\u003c\/li\u003e\n\u003cli\u003eMade for the 1964-1966 Pontiac A-Body, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSmall rubber connector hoses are not part of this listing\u003c\/li\u003e\n\u003cli\u003eStainless is stiffer than mild steel, so make any fine adjustments by hand slowly\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669498998996,"sku":"ATV6403S","price":78.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATV6403S-0__76641.1652736721.386.513.jpg?v=1789453292"},{"product_id":"the-right-stuff-1966-oldsmobile-cutlass-442-pre-bent-oe-steel-transmission-vacuum-line-atv6602","title":"The Right Stuff 1966 Oldsmobile Cutlass\/442, Pre-Bent OE Steel Transmission Vacuum Line - (ATV6602)","description":"\u003cp\u003eSmall vacuum lines on a 1966 Oldsmobile Cutlass\/442 crack, corrode and get replaced with rubber hose over the years. This Right Stuff pre-bent OE-style steel transmission vacuum line is the line that supplies engine vacuum to the automatic transmission modulator, bent to the original factory pattern so it goes in without a tubing bender.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern.\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home.\u003c\/li\u003e\n\u003cli\u003eEnds formed to match the original part.\u003c\/li\u003e\n\u003cli\u003eSteel matches the factory appearance and is easy to fine-tune by hand.\u003c\/li\u003e\n\u003cli\u003eMade for the 1966 Oldsmobile Cutlass\/442, not cut from a universal coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSmall rubber connector hoses are not part of this listing.\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669499261140,"sku":"ATV6602","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATV6602-0__49212.1652736717.386.513.jpg?v=1789453295"},{"product_id":"the-right-stuff-1966-oldsmobile-cutlass-442-pre-bent-stainless-steel-transmission-vacuum-line-atv6602s","title":"The Right Stuff 1966 Oldsmobile Cutlass\/442, Pre-Bent Stainless Steel Transmission Vacuum Line - (ATV6602S)","description":"\u003cp\u003eRestoring the engine bay on a 1966 Oldsmobile Cutlass\/442 means getting the small hard lines right, including the vacuum plumbing. This Right Stuff pre-bent stainless steel transmission vacuum line is the line that supplies engine vacuum to the automatic transmission modulator, shaped to follow the factory routing instead of being bent by hand in the garage.\u003c\/p\u003e\u003ch4\u003eWhy It's Worth It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePre-bent to the original factory pattern\u003c\/li\u003e\n\u003cli\u003eNo cutting, bending or flaring at home\u003c\/li\u003e\n\u003cli\u003eEnds formed to match the original part\u003c\/li\u003e\n\u003cli\u003eStainless steel holds up to moisture and road salt far longer than plain steel\u003c\/li\u003e\n\u003cli\u003eMade for the 1966 Oldsmobile Cutlass\/442, not cut from a universal coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBefore You Order\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSmall rubber connector hoses are not part of this listing\u003c\/li\u003e\n\u003cli\u003eStainless is stiffer than mild steel, so make any fine adjustments by hand slowly\u003c\/li\u003e\n\u003cli\u003eCompare with your original line before installing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Right Stuff","offers":[{"title":"Default Title","offer_id":48669499326676,"sku":"ATV6602S","price":78.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/2522\/7988\/files\/ATV6602S-0__52406.1652736722.386.513.jpg?v=1789453297"}],"url":"https:\/\/muscleroad.com\/collections\/transmission-cooler-lines.oembed","provider":"Muscle Road Performance Design","version":"1.0","type":"link"}